专著：
钢的高温金相学，苏德达，李家俊主编，5822yh银河国际网页版出版社，2009年
发表论文：
李家俊，臧科研，赵乃勤等，分散MgO对活性炭纤维结构及吸附性能的影响，5822yh银河国际网页版学报，2002.Vol.35(1),101-104
乔志军，李家俊，赵乃勤等， 沥青基活性炭纤维复合活化工艺的研究，离子交换与吸附，2002 vol.18（1），23-29, EI LJYXE5
李家俊，乔志军，赵乃勤等，活性炭纤维吸附甲烷的理论计算，天津工业大学学报，2002 vol.21（2），1-3
郭伟凯，李家俊，赵乃勤，周福刚，纤维类雷达波吸收剂的研究进展 2003，宇航材料工艺，2003，（6），12-15
乔志军，李家俊，赵乃勤，高温热处理对活性碳纤维表面性能的影响，新型碳材料，2004，19 (1): 53-56
郭伟凯，李家俊，赵乃勤，郭新权，微量碳纤维平行排布吸波材料结构模型（I），兵器材料科学与工程，2004,27（4），37－39
郑长进，李家俊，赵乃勤，郭新权，吸波材料的设计和应用前景，宇航材料工艺，2004，34(5)，1-5
李家俊，郭伟凯，赵乃勤，王新南，微量碳化硅纤维/环氧树脂复合吸波材料研究，宇航材料工艺，2004，34(5)，31-34
刘如光，李家俊，赵乃勤，用电化学方法合成羟基磷灰石涂层的研究进展，材料保护，2004,37（7）
李家俊，郑长进，赵乃勤，郭新权，含碳化硅纤维正交电路屏的吸波复合材料的研究，材料工程，2005，NO.3,6-9，
Qiao, Z. J., J. J. Li, N. Q. Zhao, et al, Pore size and surface properties of activated carbon fibres modified by high temperature treatment, New Carbon Materials , 2004，19(1): 53-56.
Zhao, N. Q., J. J. Li, et al, Influence of the P/M process on the microstructure and properties of WC reinforced copper matrix composite, Journal of Materials Science, 2004, 39(15): 4829-4834
Zhao Naiqin*, Wei Na, Li Jiajun, Qiao Zhijun, Cui Jing, He Fei, Surface Properties of Chemically Modified Activated Carbons for Adsorption Rate of Cr (VI), Chemical Engineering Journal , 2005, 115(1-2): 133-138
B. Jiang, N.Q. Zhao*, C.S. Shi, J.J. Li, Processing of open cell aluminum foams with tailored porous morphology, Scripta Materialia, 53(6) , 2005, 781-785
B. Jiang, N.Q. Zhao*, C.S. Shi, X.W. Du, J.J Li, A novel method for making open cell aluminum foams by powder sintering process, Materials Letters 59 (26): 3333-3336, 2005
赵乃勤,邹田春,师春生,郑长进,李家俊,碳毡电路模拟吸波复合材料的研究,功能材料,2005,36(11),1685-1688
江小雪, 赵乃勤, 贾威, 李家俊，两步阳极氧化法制备多孔阳极氧化铝膜，功能材料,2005,36(5)，720-722
崔静，赵乃勤，李家俊，活性炭制备及不同品种活性炭的研究进展，炭素技术，2005,24(1)，26-31
邹田春，赵乃勤，李家俊，师春生， 吸波材料优化设计与吸波性能计算，功能材料，36(7),2005,p 988-991+995,EI 05369347042
邹田春,赵乃勤,师春生,李家俊,郭伟凯,微量碳纤维/树脂复合吸波材料的研究,功能材料,2005,36(11),1688-1692
李家俊，郑长进，赵乃勤，郭新权，含碳化硅纤维正交电路屏的吸波复合材料的研究，材料工程，2005，NO.3,6-9
Zhao Naiqin, He Chunnian, Du Xiwen, Li Jiajun, Amorphous carbon nanotubes fabricated by low-temperature chemical vapor deposition ,Carbon，2006，44(9): 1859-1862
Naiqin ZHAO, Chunnian HE, Zhaoyang JIANG, Jiajun LI *, Yongdan LI, Fabrication and Growth Mechanism of Carbon Nanotubes by Catalytic Chemical Vapor Deposition, Materials Letters, 2006,60(2):159-163.
N.Q. Zhao, B. Jiang, X.W.Du ,J.J. Li, C.S. Shi, W.X. Zhao, Effect of Y2O3 on the mechanical properties of open cell aluminum foams, Materials Letters, 2006,60:1665-1668,
Naiqin Zhao,Tianchun Zou, Chunsheng Shi, Jiajun Li, Weikai Guo, Microwave absorbing properties of activated carbon-fiber felt screens (vertical-arranged carbon fibers)/epoxy resin composites, Materials Science Engineering B, 2006, 127(2-3):217-221
Naiqin Zhao, Chunnian He, Jiajun Li*, Zhaoyang Jiang and Yongdan Li, Study on Purification and Tip-Opening of CNTs Fabricated by CVD, Materials Research Bulletin, 2006，41(12):2204-2209
JJ Li, Cui Jin, Zhao Naiqin*,The Properties of Granular Activated Carbons Prepared from Fly Ash Using Different Methods，Carbon, 2006,Vol 44/7 pp 1346-1348
He Chunnian,Xiwen Du,J.Din,C.S.Shi, J.J.Li, Naiqin Zhao*, L.Ciu, Low-temperature CVD synthesis of carbon-encapsulated magnetic Ni nanoparticles with a narrow distribution of diameters, Carbon, 2006,44(11): 2330-2333
Chunnian He, Naiqin Zhao*, Xiwen Du, Chuansheng Shi, Jian Din,Jiajun Li,Yongdan Li, Low-temperature synthesis of carbon onions by chemical vapor deposition using nickel catalyst supported on aluminum, Scripta Materilia, 2006, 54(4): 689-693
Chunnian He, Naiqin Zhao*, Chunsheng Shi, Xiwen Du, Jiajun Li and Lan Cui, A practical method for the production of hollow carbon onion particles, Journal of Alloys and Compounds,2006，425(1-2 ):329-333
Qiao Zhijun, Li Jiajun, Zhao Naiqin*, Shi Chunsheng, Philip Nash, Graphitization and microstructure transformation of nanodiamond to onion-like carbon, Scripta Materiala. 2006,54(2): 225-229,
Jian Din, Naiqin Zhao, Chunsheng Shi, Xiwen Du, Jiajun Li，In-situ formation of Cu-ZrO2 composites by chemical routes， Journal of Alloys and Compounds, 2006，425(1-2): 390-39
Fang, D. R. Zhang, Z. F. Wu, S. D. Huang, C. X. Zhang, H. Zhao, N. Q. Li, J. J., Effect of equal channel angular pressing on tensile properties and fracture modes of casting Al-Cu alloys, Materials Science And Engineering A， 426 (1-2): 305-313 ，2006
He, C. N., N. Q. Zhao, Y. J. Han, J. J. Li, et al, Study of aluminum powder as transition metal catalyst carrier for CVD synthesis of carbon nanotubes." Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2006, 441(1-2): 266-270.
赵乃勤，邹田春,师春生,李家俊，郭伟凯,活性碳毡电路屏(直立碳纤维)/树脂复合吸波材料,复合材料学报，2006.23(2),47-52
崔静，李家俊,赵乃勤,师春生,杜希文,韩森,以除尘灰分离碳粉制备活性炭的新方法研究,离子交换与吸附,2006,22(1),25-32
崔静, 李家俊, 赵乃勤,师春生, 杜希文,韩森,KOH预处理除尘灰制备颗粒活性炭的实验,炭素技术, 2006,25(2),19-22
丁俭, 赵乃勤, 师春生, 李家俊，韩雅静，烧结工艺对ZrO2/Cu纳米复合材料性能及组织的影响，材料热处理学报, 2006.27(3)：6-9
He CN, Zhao NQ*, Shi CS, Du XW, Li JJ, TEM studies of the initial stage growth and morphologies of bamboo-shaped carbon nanotubes synthesized by CVD ，Journal of Alloys and Compounds 2007,433 (1-2): 79-83,
He CN，Zhao NQ*, Li JJ, et al, Synthesis of binary and triple carbon nanotubes over Ni/Cu/Al2O3 catalyst by chemical vapor deposition，Materials Letters，2007, 61(27):4940-4943, 221TQ,2007.11
NQ.Zhao, QR. Cui, CN. He, CS.Shi, HP.Li, JJ. Li, XW. Du, Synthesis of carbon nanostructures with different morphologies by CVD of methane，Materials Science & Engineering A，2007,460-461C: 255-260，
Zhao NQ, Jiang XX, Shi CS, Li JJ, et al., Effects of anodizing conditions on anodic alumina structure，Journal of Materials Science,2007, 42 (11): 3878-3882 ,
Naiqin Zhao, Chunnian He, Zhaoyang Jiang, Jiajun Li* and Yongdan Li, Physical activation and characterization of multi-walled carbon nanotubes catalytically synthesized from methane, Materials Letters,2007,61(3):681-685
Ding J, Zhao NQ*, Shi CS, Du XW, He CN, Li JJ. Preparation of 3YSZ/Cu composite by in-situ chemical route ，Journal Of Materials Science ,2007,42 (14): 5671-5675,
Chen D, Li JJ, Shi CS, Du XW, Zhao NQ, Properties of core-shell Ni-Au nanoparticles synthesized through a redox-transmetalation method in reverse microemulsion，Chemistry of Materials, 2007, 19 (14): 3399-3405,
Li JJ, Jia SL, Du XW, Zhao NQ, et al, Preparation and annealing effect on photoluminescent properties of Si/SiC thin films by alternate sputtering ，Surface & Coatings Technology 2007,201 (9-11): 5408-5411,
Du, X. W. Zhao, X. Jia, S. L.Lu, Y. W. Li, J. J. Zhao, N. Q. Direct synthesis of SiC nanowires by multiple reaction VS growth , Materials Science And Engineering B，136 (1): 72-77，2007
Fang DR, Duan QQ, Zhao NQ, Li JJ, et al, Tensile properties and fracture mechanism of Al-Mg alloy subjected to equal channel angular pressing ,Materials Science ＆ Engineering A, 459 (1-2): 137-144 ,2007
Fang DR, Zhang P, Duan QQ, Wu SD , Zhang ZF, Li JJ, Zhao NQ， Fatigue behavior of Al-Cu alloy subjected to different numbers of ECAP passes ，Advanced Engineering Materials, 2007, 9:860-866.
魏芳荣 李家俊 李群英 李建明 杜希文 师春生 赵乃勤，螺旋压缩弹簧应力松弛性能的动态试验研究，金属热处理，2007,32(4)：47-54
丁俭 赵乃勤 师春生 李家俊，纳米ZrO2晶型对铜基复合材料界面的影响，北京科技大学学报，2007,29(2)：9-124，EI071610557176
Fang DR, Duan QQ, Huang CX, Wu SD, Zhang ZF, Li JJ, Zhao NQ, Impact properties of Al-Cu alloy subjected to equal channel angular pressing , Acta Metallurgica Sinica, 2007, 43:1251-1255.
He, C. N., Zhao, N. Q., Shi, C. S., Du, X.W., Li, J.J., Li, H.P., Cui, Q.R. ,An approach to obtaining homogeneously dispersed carbon nanotubes in Al powders for preparing reinforced Al-matrix composites. Advanced Materials, 2007, 19(8): 1128-1132.
Zhao, N. Q., C. N. He, J. J. Li, et al, Bamboo-shaped carbon nanotubes produced by catalytic decomposition of methane over nickel nanoparticles supported on aluminum." Journal of Alloys and Compounds , 2007, 428(1-2): 79-83.
Jianli Kang, Jiajun Li, Xiwen Du, Chunsheng Shi, Naiqin Zhao*, Philip Nash, Synthesis of carbon nanotubes and carbon onions by CVD using a Ni/Y catalyst supported on copper, Materials Science & Engineering A, vol 475/1-2pp. 136-140,2008
J.L. Kang, J.J. Li, X.W. Du, C.S. Shi, N.Q. Zhao*, L. Cui and P. Nash ,Synthesis and growth mechanism of metal filled carbon nanostructures by CVD using Ni/Y catalyst supported on copper, Journal of Alloys and Compounds, vol.456，290－296，2008
Haipeng Li, Naiqin Zhao*, Chunnian He, Chunsheng Shi, Xiwen Du, Jiajun Li and Qingran Cui, Fabrication of short and straight carbon nanotubes by chemical vapor deposition ,Materials Science & Engineering A, Volume 476, 2008, 230-233
Haipeng Li, Naiqin Zhao*, Chunnian He, Chunsheng Shi, Xiwen Du and Jiajun Li，Fabrication of carbon-coated cobalt nanoparticles by the catalytic method, Journal of Alloys and Compounds, Vol 458/1-2,130-133，2008
Haipeng Li, Naiqin Zhao*, Chunnian He, Chunsheng Shi, Xiwen Du and Jiajun Li, Fabrication and growth mechanism of Ni-filled carbon nanotubes by the catalytic method ,Journal of Alloys and Compounds, vol 465/1-2，51-55，2008 doi:10.1016/j.jallcom.2007.10.088
Haipeng Li, Naiqin Zhao*,Chunnian He, Chunsheng Shi, Xiwen Du and Jiajun Li，Low temperature fabrication of hollow carbon nanospheres over Ni/Al2O3 by the catalytic method, Journal of Alloys and Compounds, vol 465/1-2，pp. 387-390，2008 doi:10.1016/j.jallcom.2007.10.090
Chunnian He, Naiqin Zhao*, Chunsheng Shi, Jiajun Li, Haipeng Li, Magnetic properties and transmission electron microscopy studies of Ni nanoparticles encapsulated in carbon nanocages and carbon nanotubes , Materials Research Bulletin, Vol 43/8 , 2260-2265, 2008
C.N. He, N.Q. Zhao*, X.W. Du, C.S. Shi, J.J. Li and F. He, Characterization of bamboo-shaped CNTs prepared using deposition-precipitation catalyst, Materials Science & Engineering A, vol 479/1-2 pp. 248/252,2008
C.N. He, C.S. Shi, X.W. Du, J.J. Li , N.Q. Zhao*, TEM investigation on the initial stage growth of carbon onions synthesized by CVD , Journal of Alloys and Compounds ,vol 452/2pp. 258-262,2008
Jie He, Naiqin Zhao*, Chunsheng Shi, Xiwen Du, Jiajun Li and Philip Nash , Reinforcing copper matrix composites through molecular-level mixing of functionalized nanodiamond by co-deposition route , Materials Science and Engineering: A，Vol 490/1-2 pp 293-299，2008
Chunsheng Shi*, Guoqiang Wang, Naiqin Zhao, Xiwen Du and Jiajun Li, NiO nanotubes assembled in pores of porous anodic alumina and their optical absorption properties , Chemical Physics Letters ,Volume 454, Issues 1-3, 10 March 2008, Pages 75-79
Li, H. P., N. Q. Zhao, Y. Liu, C. Y. Liang, C. S. Shi, X. W. Du, J. J. Li, Fabrication and properties of carbon nanotubes reinforced Fe/hydroxyapatite composites by in situ chemical vapor deposition, Composites Part a-Applied Science and Manufacturing, 2008, 39(7): 1128-1132.
Liu, S., D. Chen, K. Zhang, J. J. Li, Z. Q. Zhao, Production of hydrogen by ethanol steam reforming over catalysts from reverse microemulsion-derived nanocompounds, International Journal of Hydrogen Energy, 2008, 33(14): 3736-3747.
J.L. Kang, J.J. Li, X.W. Du, C.S. Shi, N.Q. Zhao*, R.X. Hu and P. Nash, In situ synthesis of ceria decorated carbon nanotubes by chemical vapor deposition, Materials Letters, 63（2009）182-184
Kang, JL，Li, JJ，Zhao, NQ, et al.The effect of catalyst evolution at various temperatures on carbon nanostructures formed by chemical vapor deposition, Journal Of Materials Science, 2009, 10(44):2471-2476.
Jianli Kang, Philip Nash, Jiajun Li, Chunsheng Shi, Naiqin Zhao, Sijie Gu, The effect of nanotube heat treatment on mechanical properties of carbon nanotube reinforced copper matrix composites, Journal of Materials Science，2009,44,5602-5608
Jianli Kang, Jiajun Li, Chunsheng Shi, Philip Nash, Dajun Chen, Naiqin Zhao,∗
In situ synthesis of carbon onion/nanotube reinforcements in copper powders ,Journal of Alloys and Compounds , 2009, 476(1-2):869-873.
Kang, JL，Nash, P，Li, JJ, et al.,Achieving highly dispersed nanofibres at high loading in carbon nanofibre-metal composites, Nanotechnology, 2009,20(23).
Dong Chen, Shuo Liu, Jiajun Li, Naiqin Zhao, *, Chunsheng Shia, Xiwen Dua and Jing Shenga，Nanometre Ni and core/shell Ni/Au nanoparticles with controllable dimensions synthesized in reverse microemulsion ，Journal of Alloys and Compounds，2009, 475(1-2):49-500.
Haipeng Li, Naiqin Zhao*, Lihui Wang, Chunsheng Shi, Xiwen Du and Jiajun Li, Synthesis of carbon nanohorns by the simple catalytic method , Journal of Alloys and Compounds, 2009， 473（1-2）:288-292.
Zou TC *, Zhao NQ, Shi CS, Wang CY, Li JJ,Microwave absorption studies of the planar equiangular spiral antenna array/epoxy resin composites, Journal of Materials Science, 2009, 44(9):2427-2429.
C.N. He, N.Q. Zhao*, C.S. Shia, X.W. Du, J.J. Li , F. Tian，Effect of annealing on the structure of carbon onions and carbon coated Ni nanoparticles fabricated by chemical vapor deposition，Journal of Alloys and Compounds， 2009, 472(1-2), 230-233
S. Gu, J. Kang, P. Nash, J. Li and N. Zhao, Synthesis and Properties of Carbon Nanotube/Silver Matrix Composites, 216th ECS meeting, 2009, Vienna, Austria.
Zhao Naiqin, Ma Jie, Shi Chunsheng, Du Xiwen, Li Jiajun, Carbon nanotube reinforced metal matrix composites fabricated by in-situ chemical vapor deposition, Heat Treatment of Metals, 2009, 34(7),114-119
赵乃勤，马杰，师春生，杜希文，李家俊，原位化学气相沉积法制备碳纳米管增强金属基复合材料，金属热处理，2009，34（7）：100-104
Zheng, Y，Shi, CS， Zhao, NQ, Li, JJ, et al.，Structure and photoluminescence of SiC/ZnO nanocomposites prepared by radio frequency alternate sputtering ， Journal of Materials Science, 2010, 45(24):6657-6660.
Liu, EZ，Zhao, NQ， Li, JJ, et al，.Surface State Induced Ferromagnetism in Co- and Mn-Doped ZnO Surfaces ， Journal of Physical Chemistry C, 2011, 115(8):3368-3371.
Zhang CG1, Li JJ, Shi CS1, Liu EZ1, Du XW, Feng W, Zhao NQ*， The efficient synthesis of carbon nano-onions using chemical vapor deposition on an unsupported Ni-Fe alloy catalyst， Carbon, 2011, 49(4): 1151-1158.
Kang, JL， Li, JJ， Zhao, NQ, et al.，General rules governing carbon nanomaterial growth directly on metal support by chemical vapor deposition， Materials Chemistry and Physics, 2011, 125(3):386-389.
Kang, JL，Li, JJ，Zhao, NQ, et al，.Study of Mg Powder as Catalyst Carrier for the Carbon Nanotube Growth by CVD，Journal of Nanomaterials, 2011
授权发明专利:
赵乃勤,师春生,何春年,杜希文,李家俊,气相沉积原位反应制备碳纳米管增强铝基复合材料的方法,ZL200510014890.2,2008.7.30
赵乃勤,何春年,师春生,李家俊,杜希文，以Ni/Al催化剂化学气相沉积制备碳纳米管和碳洋葱的方法,授权号：ZL200510014889.X，2008.2.13
师春生,邹田春,赵乃勤,杜希文,李家俊,一种新型碳纤维吸波复合材料的制备方法,专利号:ZL200510014991.X
赵乃勤，康建立，师春生，杜希文，李家俊，以Ni/Re/Cu催化剂化学气相沉积制备碳纳米管的方法，ZL200610014782.X,2008.1.2
赵乃勤，康建立，师春生，杜希文，李家俊，气相沉积原位反应制备碳纳米管增强铜基复合材料的方法，ZL200610014783.4,2008.7.9
赵乃勤，何洁，师春生，李家俊，杜希文，化学共沉积制备纳米金刚石增强铜基复合材料的方法，ZL200710057117.3，2008.7.9
赵乃勤，何春年，师春生，杜希文，李家俊，铁磁纳米线的制备方法，ZL200710056737.5，2008.9.10
赵乃勤，何春年，师春生，杜希文，李家俊，原位合成碳纳米管/镍/铝增强增韧氧化铝基复合材料制备方法，ZL200710056691.7